run show bfd counters

The run show bfd command displays the counter informations about BFD sessions.

Command Syntax

run show bfd [vrf <vrf-name>] [interface <interface>] | multihop] peer <peer-ip> counters

Parameter

Parameter	Description
vrf <vrf-name>	Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].
[interface <interface>] \| multihop]	Optional. interface <interface>: Specifies an interface for BGP connection. multihop: Shows informations about a multi-hop BFD session.
peer <peer-ip>	Specifies the peer for a BFD session. The value is an IPv4 or IPv6 address.

Example
• Show the counter information about the BFD session.

admin@Xorplus# run show bfd peer 1.1.1.1 counters 
peer 1.1.1.1 local-address 1.1.1.2 vrf default
                Control packet input: 0 packets
                Control packet output: 1 packets
                Echo packet input: 0 packets
                Echo packet output: 0 packets
                Session up events: 0
                Session down events: 0
                Zebra notifications: 1

PICOS-4.3.0_Configuration_Guide

run show bfd counters

Analytics

Related content