set interface aggregate-ethernet routed-interface name

The set interface aggregate-ethernet routed-interface name command configures the name for the routed interface, which will be referred to in other CLI commands as the routed interface name.

Command Syntax

set interface aggregate-ethernet <lag-name> routed-interface name <string>

Parameter

Parameter	Description
aggregate-ethernet <lag-name>	Specifies the name of a LAG port. The value is like ae1, ae10, etc.
name <string>	Specifies the name for the routed interface. The value could be up to 15 alphanumeric characters (including three special characters . – and @).

Example

Configure the name for the routed interface.

admin@Xorplus# set interface aggregate-ethernet ae3 routed-interface enable true
admin@Xorplus# set interface aggregate-ethernet ae3 routed-interface name rae3
admin@Xorplus# commit