/
run show dhcp server binding address

run show dhcp server binding address


The run show dhcp server binding address command shows the allocated IP address binding information.


Command Syntax

run show dhcp server binding [vrf <vrf-name>] [address <ipv4-address>]


Parameter

Parameter

Description

vrf <vrf-name>

Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].

Note that: The command shows the allocated IP address binding information in the default VRF if not explicitly specify a VRF name.

address <ipv4-address>

Optional. Specifies an allocated address. The value is in dotted decimal notation.


Example

  • View the allocated IP address binding information.
admin@Xorplus# run show dhcp server binding
2 bound clients
           
IP address      MAC address          Server      Interface
10.1.1.89       00:0a:12:00:12:12    10.1.1.1    vlan100
10.1.1.88       00:0a:12:00:12:34    10.1.1.1    vlan100

admin@Xorplus# run show dhcp server binding vrf vrf1
1 bound clients

IP address      MAC address          Server     Interface
10.1.1.89       00:0a:12:00:12:12    10.1.1.1   vlan100

admin@Xorplus# run show dhcp server binding address 10.1.1.89
IP address      MAC address          Server     Interface
10.1.1.89       00:0a:12:00:12:12    10.1.1.1   vlan100

admin@Xorplus# run show dhcp server binding vrf vrf1 address 10.1.1.89
IP address      MAC address          Server     Interface
10.1.1.89       00:0a:12:00:12:12    10.1.1.1   vlan100

In the show result, "Server" represents the IP address of the Layer 3 VLAN interface connected to the DHCP client.



Copyright © 2025 Pica8 Inc. All Rights Reserved.