Install and Remove FRU

The following instructions are used to replace an FRU (field-replaceable unit) on the switch:

1. Remove the faulty FRU from the switch.
2. Unpack the spare FRU, and double check to ensure that the FRU model is compatible with the switch.
3. Plug the FRU into the switch, moving slowly and using standard techniques to reduce electrostatic build-up.
4. Tighten the screws, and double check to make sure that the FRU is properly seated.
   
   

2-5-1 Installation FRU on switch schematic diagram
Remove FRU on the switch in the same way as installation.