802.1Q VLAN

In the following topology, user needs to configure 2 VLANs in switches A and B.

Figure 4-1. 802.1Q network configuration

Configure Switch-A

In Switch-A, user needs to configure ge-1/1/1~ge-1/1/4 as access port while configuring te-1/1/49 as trunk port because the 10Gbit link will trunk the traffic of VLAN-2 and VLAN-3.

root@PicOS-OVS# ovs-vsctl add-port br0 te-1/1/1 vlan_mode=access tag=2 -- set Interface te-1/1/1 type=pica8
root@PicOS-OVS# ovs-vsctl  add-port br0 te-1/1/2 vlan_mode=access tag=2 -- set Interface te-1/1/2 type=pica8
root@PicOS-OVS#
root@PicOS-OVS# ovs-vsctl  add-port br0 te-1/1/3 vlan_mode=access tag=3 -- set Interface te-1/1/3 type=pica8
root@PicOS-OVS# ovs-vsctl add-port br0 te-1/1/4 vlan_mode=access tag=3 -- set Interface te-1/1/4 type=pica8
root@PicOS-OVS#
root@PicOS-OVS# ovs-vsctl  add-port br0 te-1/1/49 vlan_mode=trunk trunk=2,3 -- set Interface te-1/1/49 type=pica8
root@PicOS-OVS#

Configure Switch-B

In Switch-B, user needs to configure ge-1/1/1~ge-1/1/4 as access port while te-1/1/49 as trunk port because the 10Gbit link will trunk the traffic of VLAN-2 and VLAN-3.

root@PicOS-OVS# ovs-vsctl  add-port br0 te-1/1/1 vlan_mode=access tag=2 -- set Interface te-1/1/1 type=pica8
root@PicOS-OVS# ovs-vsctl  add-port br0 te-1/1/2 vlan_mode=access tag=2 -- set Interface te-1/1/2 type=pica8
root@PicOS-OVS#
root@PicOS-OVS# ovs-vsctl  add-port br0 te-1/1/3 vlan_mode=access tag=3 -- set Interface te-1/1/3 type=pica8
root@PicOS-OVS# ovs-vsctl add-port br0 te-1/1/4 vlan_mode=access tag=3 -- set Interface te-1/1/4 type=pica8
root@PicOS-OVS#
root@PicOS-OVS# ovs-vsctl  add-port br0 te-1/1/49 vlan_mode=trunk trunk=2,3 -- set Interface te-1/1/49 type=pica8
root@PicOS-OVS#