PICOS Mode Selection
PicOS can run in two different modes:
- L2/L3 Mode
- OVS Mode
L2/L3 Mode
In the L2/L3 (Layer 2 / Layer 3) mode, PicOS can run switching and routing protocols, as well as OpenFlow applications. In this mode, L2/L3 daemons are running, but OVS can also be activated if OpenFlow in Crossflow Mode is enabled.
OVS Mode
In the OVS (Open vSwitch) mode, PicOS is optimized for OpenFlow applications. In this mode, L2/L3 daemons are not running, and the system is fully dedicated to OpenFlow and OVS.
Helpful related pages:
Copyright © 2024 Pica8 Inc. All Rights Reserved.