Configuring Egress Interface-based Rate Limiting
To control the rate of all outgoing traffic on an interface, configure egress interface-based rate limiting. When the transmit rate of packets exceeds the configured rate limit, the excess packets will be discarded.
set interface gigabit-ethernet
<interface-name> rate-limiting
egress kilobits
<value>
set interface gigabit-ethernet
<interface-name> rate-limiting
egress ratio
<value>
set interface gigabit-ethernet
<interface-name> rate-limiting egress burst
<burst-size>
NOTE:
|
Configuration Example
- Set the rate limit to 8000 kbit/s on interface te-1/1/1 for the egress traffic, and use the system adapted burst size.
admin@Xorplus# set interface gigabit-ethernet te-1/1/1 rate-limiting egress kilobits 8000 admin@Xorplus# commit
- You can use run show interface gigabit-ethernet command to check the configuration, where ”Interface rate limit ingress: , egress: ” and ”Interface burst limit ingress: , egress: ” indicating the configuration of interface-based rate limit and burst size.
admin@Xorplus# run show interface gigabit-ethernet te-1/1/1 Physical interface: te-1/1/1, Enabled, error-discard False, Physical link is Down Interface index: 1, Mac Learning Enabled Port mode: access Description: Link-level type: Ethernet, MTU: 1514, Speed: Auto, Duplex: Full Source filtering: Disabled, Flow control: Disabled, Auto-negotiation: Disabled Interface flags: Hardware-Down SNMP-Traps Internal: 0x0 Interface rate limit ingress: unlimited,egress: 8000kbps Interface burst limit ingress: unlimited, egress: 10kb Link fault signaling ignore local fault:false, ignore remote fault:false force up mode:false Precision Time Protocol mode:none Current address: cc:37:ab:b6:9b:55, Hardware address: cc:37:ab:b6:9b:55 Traffic statistics: 5 sec input rate 0 bits/sec, 0 packets/sec 5 sec output rate 0 bits/sec, 0 packets/sec Input Packets............................0 Output Packets...........................0 Input Octets.............................0 Output Octets............................0
Copyright © 2024 Pica8 Inc. All Rights Reserved.