set protocols pim interface sm


The set protocols pim interface sm command is used to enable PIM-SM function on a specific L3 interface.

The delete protocols pim interface sm command is used to disable PIM-SM function on a specific L3 interface.


Command Syntax

set protocols pim interface <interface-name> sm


Parameter

Parameter

Description

interface <interface-name>

Specifies an L3 interface. The value could be a VLAN interface name, loopback interface name, routed interface or sub-interface name.The value is a string.


Example

  • Enable PIM-SM function on the L3 VLAN interface vlan-2.
admin@Xorplus# set protocols pim interface vlan-2 sm
admin@Xorplus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.