set protocols msdp mesh-group member

Owned by Tracy Yang
Nov 28, 2023
1 min read

The set protocols msdp mesh-group member command is used to configure the MSDP member devices.


Command Syntax

set protocols msdp mesh-group < mesh-group-name> member <peer-address>


Parameter

Parameter

Description

mesh-group < mesh-group-name>

Specifies the name of the MSDP mesh group. The value is a string.

member <peer-address>

Specifies the address of the remote MSDP peer that becomes a MSDP member. The value is in dotted decimal format.


Usage Guidelines

Only one mesh group is allowed in a PIM-SM domain.

When configuring MSDP peers, configure the local MSDP device as the source and all the other remote MSDP peer devices in the same mesh group as members.


Example

  • Create an MSDP mesh group.
admin@Xorplus# set protocols msdp mesh-group 6.6.6.6 member 3.3.3.3
admin@Xorplus# set protocols msdp mesh-group 6.6.6.6 source 2.2.2.2 
admin@Xorplus# commit



Copyright © 2024 Pica8 Inc. All Rights Reserved.