vxlans source-interface address
User can configure vxlan source interface ip address .
Command Syntax
set vxlans source-interface <interface> address <ipv4-addr>
delete vxlans source-interface <interface> address <ipv4-addr>
Parameter
•<interface> The vlan interface, e.g. loopback or vlan10
•<ipv4-addr>The IPv4 address
Example
• This example demonstrates how to configure the vxlan to use the IP address 10.10.10.1 as the source address in the encapsulation fields of outbound VXLAN frames.
XorPlus# set vxlans source-interface loopback address 10.10.10.1 XorPlus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.