set protocols spanning-tree stp interface edge
The set protocols spanning-tree stp interface edge command configures a physical port or a LAG port as an edge port for STP mode.
Command Syntax
set protocols spanning-tree stp interface <interface-name> edge <true | false>
Parameter
Parameter | Description |
interface <interface-name> | Specifies a port name. The value is a string that can be set to a physical port name or a LAG port. |
edge <true | false> | Enables or disables edge on a port. The value could be true or false.
By default, edge port is disabled. |
Usage Guidelines
The edge port does not participate in the spanning tree calculation. However, once the edge port receives a configuration BPDU, the switching device automatically sets the edge port to a non-edge port and performs spanning tree calculation again.
Example
- Configure the port ge-1/1/1 as an edge port.
admin@Xorplus# set protocols spanning-tree stp interface ge-1/1/1 edge true admin@Xorplus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.