set l3-interface tunnel source

Run the command set l3-interface tunnel source to configure the GRE tunnel source IPv4 address or source interface.

Run the command delete l3-interface tunnel source to delete this configuration.

Command Syntax

set l3-interface tunnel <tunnel-name> source <tunnel-source>

delete l3-interface tunnel <tunnel-name> source <tunnel-source>

Parameter

Parameter

Description

tunnel <tunnel-name>

Specifies the name of the GRE tunnel in alpha-numeric format with no spaces.

source <tunnel-source>

Specifies the GRE tunnel source IPv4 address or source interface.

PicOS supports to configure a loopback interface, an L3 VLAN interface, a routed interface or a sub-interface to a GRE tunnel. If multiple IP addresses are configured on the source interface, the smallest IP address will be the source IP address of this GRE tunnel.

Example

Configure the GRE tunnel source IPv4 address as 2.2.2.2 for tunnel tnl4.

admin@XorPlus# set l3-interface tunnel tnl4 source 2.2.2.2
admin@Xorplus# commit