run show gvrp interface
The run show gvrp interface command is used to view GVRP information on a specific interface, including GVRP Status, Registrar State, Timers and VLANs learned by the interface through GVRP.
Command Syntax
run show gvrp interface <interface-name>
Parameter
Parameter | Description |
interface <interface-name> | Specifies an interface name that enabled GVRP. The value could be a physical interface or a LAG interface. |
Example
- View the configuration information of GVRP.
admin@PICOS# run show gvrp interface te-1/1/21 Port      Leave Timer(ms) LeaveAll Timer(s) Join Timer(ms) te-1/1/21    1000 10 200  Port      Vlans Added te-1/1/21    10, 11
Copyright © 2024 Pica8 Inc. All Rights Reserved.