set protocols erps ring instance r-aps level

The set protocols erps ring instance r-aps level command configures the Automatic Protection Switching (APS) message level for the node on the ERPS ring.

The delete protocols erps ring instance r-aps level command deletes the configuration.

Command Syntax

set protocols erps ring <ring-id> instance <instance-id> r-aps level <level-id>

delete protocols erps ring <ring-id> instance <instance-id> r-aps level

Parameters

Parameter	Description
ring <ring-id>	Specifies the ID of the ring. The value is an integer that ranges from 1 to 8.
instance <instance-id>	Specifies the instance ID for a ring. The value is an integer that ranges from 1 to 2.
level <level-id>	Specifies the Automatic Protection Switching (APS) message level for the node on the Ethernet ring. The value is an integer that ranges from 1 to 7. The default value of r-aps level is 7.

Usage Guidelines

The default value of r-aps level is 7. All nodes in the ethernet ring must be configured with the same level.

Each ERPS node can only process APS messages with an r-aps level value less than or equal to its own.

Example

Configure the Automatic Protection Switching (APS) message level for the node.

admin@PICOS# set protocols erps ring 5 instance 2 r-aps level 5
admin@PICOS# commit