set interface gigabit-ethernet rate-limiting egress kilobits

The set interface gigabit-ethernet rate-limiting egress kilobits command sets a rate limit value in kbit/s on a port for the egress traffic.

NOTE:

In the same direction of the same interface, kilobits and ratio cannot be configured simultaneously.

Command Syntax

set interface gigabit-ethernet <interface-name> rate-limiting egress kilobits <value>

Parameter

Parameter

Description

interface <interface-name>

Specifies an interface name. The value is a string.

kilobits <value>

Specifies the rate limit value in kbits/s. The value is an integer that ranges from 0 to 10000000.

When the value is configured to 0, it indicates no rate limit on the interface.

Example

Set the rate limit value to 1000 kbit/s on port ge-1/1/1 for the egress traffic.

admin@Xorplus# set interface gigabit-ethernet ge-1/1/1 rate-limiting egress kilobits 1000
admin@Xorplus# commit