PICOS Documentation
Spaces
Apps
Templates
Create
PICOS-4.4.4_Configuration_Guide
All content
Space settings
Content
Results will update as you type.
•
Release Notes for PICOS 4.4.4
Hardware Guides
PICOS System Configuration Guide
PICOS Routing and Switching Configuration Guide
PICOS Routing and Switching Command Reference
Command-Line Interface Commands
System Management Commands
VLAN Configuration Commands
Layer 3 Routing Commands
•
run show neighbors
•
run show route
•
run show route forward-host
•
run show route forward-route
•
run show vrf
•
set ip vrf
•
set ip routing enable
•
set system management-vrf enable
BGP Commands
OSPFv2 Commands
OSPFv3 Command Reference
Static Route Configuration Commands
•
set protocols static interface-route interface
•
set protocols static mroute
•
set protocols static route
Route Map Commands
Route Leaking Commands
BFD Configuration Commands
Policy-Based Routing (PBR) Commands
IP Source Guard (IPSG) Commands
Voice VLAN Configuration Commands
ACL Configuration Commands
QoS Configuration Commands
Protocol Configuration Commands
IP Multicast Commands
•
OpenFlow Commands in CrossFlow Mode
VXLAN Commands
BGP EVPN Commands
PoE Configuration Commands
VRRP Commands
Spanning Tree Protocol Commands
MLAG Commands
GRE Tunnel Interface Commands
GVRP Commands
MVRP Commands
ERPS Commands
EFM OAM Commands
Interface Configuration Commands
Loopback Detection Commands
PICOS Open vSwitch Configuration Guide
PICOS Open vSwitch Command Reference
Troubleshooting Guide
Blogs
PICOS-4.4.4_Configuration_Guide
/
/
Layer 3 Routing Commands
/
Static Route Configuration Commands
Summarize
Static Route Configuration Commands
Tracy Yang
Owned by
Tracy Yang
May 24, 2024
1 min read
Loading data...
set protocols static interface-route interface
set protocols static mroute
set protocols static route
Copyright © 2024 Pica8 Inc. All Rights Reserved.
{"serverDuration": 12, "requestCorrelationId": "e3ef6208541f495c8801f6491e83c545"}