Install hangers, slide rail, grounding cable to the switch

During the installation process, create adjustments according to requirements of installation, and select an appropriate location for hanging ears and grounding cable installations.

The instructions for how to install hanging ears and slide rails is as follows:

Step 1 Install the hangers to the case:
Line up the mounting holes of the hanging ears and the chassis side screw holes. Tighten the screws so that the hanging ears are fixed to the chassis.

Step 2 Install the slide guide rail to the chassis:

Line up the mounting holes of the slide guide rail and the side screw holes. Tighten the screws so that the slide guide rail is fixed to the chassis.

Step 3 Install the grounding screw, which connects the grounding cable to the screw holes.

2-1 Installation of hangers, slide rail and grounding cable diagram