PICOS Supported Features

PICOS Supported Features

First Level Feature

Secondary Level Feature

Third Level Feature

S5810 Series Switch

S5860 Series Switch

AS9716-32D

N9550-32D

N8550-64C

N8560-32C S5870-48T6S-U

S5870-48T6S

S5870-48T6BC-U

S5870-48T6BC

N5850-48X6C

 System Management

Hardware management of system FAN and PSU

/

Syslog management

/

Boot diagnose

/

Recover default configuration and password

/

Zero Touch Provisioning (ZTP)

/

System file management

/

User management

/

Support to configure login methods

/

System time management: manual method, NTP, PTP

/

Domain Name System (DNS)

/

Layer 2 Switching Configuration

Ethernet Ports Management Configuration

Enable or disable the Ethernet port.

Configuring port speed.

MTU

Flow control

Flow statistics

Port breakout

Routed Interface and Sub-interface

Routed Interface

Layer 3 VLAN Interface 

Storm Control 

×

Local loopback

Backup port

Link Fault Signaling (LFS)

Forwarding Error Correction  (FEC)

Time Domain Reflectometry (TDR)

Clock and Data Recovery (CDR)

MAC configuration

Static MAC entries and Dynamic MAC Address Learning

Static Link Aggregation (LAG) Configuration

Static LAG

Dynamic LAG (LACP)

Load balancing

Resilient LAG Hashing

×

Symmetric Hash for LAG 

MLAG

Basic MLAG
Support IPV6

MLAG Active-Ative

 

Load balancing
 

MLAG DHCP Snooping

MLAG DHCP relay

MLAG IGMP snooping

MLAG VxLAN

×

×

×

MLAG PVST+
 

Port access mode

ACCESS
Trunk
Hybrid 

VLAN

Port-based VLAN

MAC Trace

MAC-based VLAN

×

VLAN mapping

QinQ

×

VLAN registration

GVRP

MVRP

Private VLAN

/

×

Voice VLAN

/

Spanning Tree Protocol

STP

RSTP

MSTP

PVST+

BPDU Filter

BPDU Root Guard

BPDU TCN-Guard

BPDU-Guard

Edge port

Manual forwarding

BPDU Tunneling 

Layer 2 protocol messages such as CDP,  LLDP,  LACP and STP are supported and can be transmitted through BPDU tunnels.

Ethernet Ring Protection Switching (ERPS) 

ERPSv1

ERPSv2

Unidirectional Link Detection (UDLD)

/

Loopback Detection

/

IP Service Configuration Guide

IPv4 Basic Configuration

/

ARP

Static ARP
Dynamic ARP

ARP Proxy

DHCP

DHCP server and DHCP client

DHCP relay and dhcp relay option82

DHCPv6 Relay

DHCP snooping
DHCP snooping trust-port
DHCP snooping option82

Equal-Cost Multipath Routing (ECMP) 

Max path
Load balancing
Symmetric

VRF

Base VRF

Management VRF and VRF Route Leaking

IPv6

IPv6 DHCP Relay
IPv6 NDP
IPv6 ECMP
Path MTU Discovery 

IP Routing Configuration

IP addressing

IPv4 Addressing
IPv6 Addressing
SVI
Routed interface

Static routing

IPv4/IPv6 static routing
Multiple nexthop static route

RIP

RIP Network
RIP VRF
RIP timer
RIP passive-interface
Redistribution of static route, connnected route, OSPF2 route and BGP routes into RIP withh route map filtering.

RIPng

RIPng Network
RIP VRF
Redistribution of static route, connnected route, OSPF2 route and BGP routes into RIP withh route map filtering.

OSPF

Single OSPFv2 instance
Single OSPFv2 instance for each VRF
OSPFv2 Multiple instances
Intra- and inter-area routing.
Type 1 and 2 external routing.
Broadcast and P2P interfaces.
Stub areas.
Not so stubby areas (NSSA)
MD5 Authentication.
Redistribution of static route, connnected route, RIP route and BGP routes into OSPFv2 withh route map filtering.
OSPFv2 passive interface

Copyright © 2025 Pica8 Inc. All Rights Reserved.