run show snmp statistics
The run show snmp statistics command shows the SNMP messages statistics.
Command Syntax
run show snmp statistics
Parameter
None.
Example
•This example shows the SNMP messages statistics.
admin@XorPlus# run show snmp statistics SNMP statistics: Input: Packets: 0, Bad versions: 0, Bad community names: 0, Bad community uses: 0, ASN parse errors: 0, Too bigs: 0, No such names: 0, Bad values: 0, Read onlys: 0, General errors: 0, Total request varbinds: 0, Total set varbinds: 0, Get requests: 0, Get nexts: 0, Set requests: 0, Get responses: 0, Traps: 0, Silent drops: 0, Proxy drops 0 Output: Packets: 0, Too bigs: 0, No such names: 0, Bad values: 0, General errors: 0, Get requests: 0, Get nexts: 0, Set requests: 0, Get responses: 0, Traps: 0
Copyright © 2024 Pica8 Inc. All Rights Reserved.