show vlans voice-vlan vlan-id <text>

Show special voice vlan id detail information.

Command Syntax
show vlans voice-vlan vlan-id <text>

Parameter
•<text> voice-vlan id, can't be the same with pvid or vlan-member

Example
• This example is to show voice-vlan detail information::

1.ge-1/1/1 is in suto mode and aging.
admin@XorPlus#  run show vlans voice-vlan vlan-id 10
Voice Vlan ID:10
Voice Vlan local priority:6
Voice Vlan dscp:46
Voice Vlan aging time:1440 minutes
Current voice vlan enabled port mode:
Port           Mode      Tagged    Mac_Address      Status          
--------------------------------------------------------------------
ge-1/1/1       auto      false                      Aging:86143sec  
 
2.ge-1/1/2 is in auto mode and working.
admin@XorPlus# run show vlans voice-vlan vlan-id 20
Voice Vlan ID:20
Voice Vlan local priority:6
Voice Vlan dscp:46
Voice Vlan aging time:1440 minutes
Current voice vlan enabled port mode:
Port           Mode      Tagged    Mac_Address      Status          
--------------------------------------------------------------------
ge-1/1/2       auto      false     0:1:e3:0:0:0     Working        
  
3.ge-1/1/3 is in auto mode and not working.
admin@XorPlus# run show vlans voice-vlan vlan-id 30
Voice Vlan ID:30
Voice Vlan local priority:6
Voice Vlan dscp:46
Voice Vlan aging time:1440 minutes
Current voice vlan enabled port mode:
Port           Mode      Tagged    Mac_Address      Status          
--------------------------------------------------------------------
ge-1/1/3       auto      false                      Idle    
   
4.ge-1/1/4 is in manual mode. It can't display any mac-addresses and status will always be working in this mode.      
admin@XorPlus# run show vlans voice-vlan vlan-id 40
Voice Vlan ID:40
Voice Vlan local priority:6
Voice Vlan dscp:46
Voice Vlan aging time:1440 minutes
Current voice vlan enabled port mode:
Port           Mode      Tagged    Mac_Address      Status          
--------------------------------------------------------------------
ge-1/1/4       manual    false                      Working