set protocols dhcp server pool range low

The set protocols dhcp server pool range low command configures the lower boundary of a range of addresses in the address pool.

Command Syntax

set protocols dhcp server pool <pool-name> range <range-name> low <ipv4-address>

Parameter

Parameter	Description
pool <pool-name>	Specifies an address pool name. The value is a string of case-sensitive characters, spaces are not supported.
range <range-name>	Specifies a range name of addresses. The value is a string of case-sensitive characters, spaces are not supported.
low <ipv4-address>	Specifies the lower boundary of a range of addresses. The value is in dotted decimal notation.

Usage Guidelines

This command should be configured together with the command set protocols dhcp server pool <pool-name> range <range-name> high <ipv4-address>, separately configuring the lower and upper boundaries of an address range of an address pool. The address range is required to be a subnet of the address pool.

NOTE:

The address range is optional. If not configured, it means that all the IP addresses in the address pool are available for address assignment. However, if configured, only addresses in the range are used for address assignment.
When multiple address ranges are configured under an address pool, there should be no address overlap between different ranges.

Example

Configure a range of addresses.

admin@Xorplus# set protocols dhcp server pool pool1 range range1 low 10.1.10.2
admin@Xorplus# set protocols dhcp server pool pool1 range range1 high 10.1.10.225
admin@Xorplus# commit