run show vrrp

Owned by Tracy Yang
Mar 19, 2024
1 min read

The run show vrrp command displays the configuration information of VRRP group. 

NOTE:

This command applies to both VRRPv2 and VRRPv3 configuration.


Command Syntax

run show vrrp <interface-name>


Parameter

Parameter

Description

<interface-name>

Optional. Specifies the Layer 3 interface name of VRRP device. The value is a string.


Example

  •  Run run show vrrp command to view the configuration information of VRRP group.
admin@XorPlus# run show vrrp vlan100
Interface: vlan100
VRID: 1
Version:                      3
Accept:  disable
Load-balance: enable
State: Master
Master IP: 192.168.1.1
Virtual MAC: 00:00:5e:00:01:01
Preempt: enable
Adver Interval: 4 
Priority: 250 
Virtual IP: 192.168.1.5
Auth-type:                    simple              
Auth-key:                     123456

Copyright © 2024 Pica8 Inc. All Rights Reserved.