set protocols ethernet-oam interface enable

The set protocols ethernet-oam interface enable command can be used to enable or disable EFM OAM function on a specific interface. Note that both ends of the connected OAM link need to be configured with this command to enable the EFM OAM function.

The delete protocols ethernet-oam interface enable command deletes the configuration.

Command Syntax

set protocols ethernet-oam interface <interface-name> enable <true | false>

delete protocols ethernet-oam interface <interface-name> enable

Parameter

Parameter

Description

interface <interface-name>

Specifies an interface name. The value could be a physical interface.

<true | false>

Enable or disable EFM OAM function on a specific interface. The value could be true or false.

true: Enable EFM OAM function on a specific interface.
false: Disable EFM OAM function on a specific interface.

By default, EFM OAM function is disabled.

Example

Enable EFM OAM function on a specific interface.

admin@PICOS# set protocols ethernet-oam interface te-1/1/19 enable true
admin@PICOS# commit