AS9716-32D Switch

System LED Definition

Feature

Detailed Description

Comment

Diagnosis LED

l  Solid green – All OK, CLI prompt available

l  Blinking green – Boot-up in progress

l  Solid amber –System self-diagnostic test has detected a fault (Fan, thermal or any interface fault.).

At front

FAN LED

l   Solid green –System FAN operating normally.

l   Solid amber –Fan tray present buy system FAN is fault.

l   OFF – System OFF.

At front

PS1 LED

l   Solid green –This power is operating normally.

l   Solid amber –PWR present but not power on or this power is fault.

l  OFF – Power supply not present.

At rear

PS2 LED

l   Solid green –This power is operating normally.

l   Solid amber –PWR present but not power on or this power is fault.

l  OFF – Power supply not present.

At front

Locator LED

l   Not supported.

At front

Port LED Definition

QSFP56-DD ports LED Indications

Only the 1st LED is used when running at 400G without breakout.

  • Solid Blue - Port linked operating at max port speed 400G.

  • Off - No link

  • Flashing Blue - Transmit/Receive is activity.

Only the 1st LED is used when running at 100G without breakout.

  • Solid Green - Port linked operating at max port speed 100G.

  • Off - No link

  • Flashing Green - Transmit/Receive is activity.

All four LEDs are used when running at 4 x100G in breakout mode.

  • Solid Green - Port linked operating at max port speed 100G

  • Off - No link

  • Flashing Green -Transmit/Receive is activity

Management Port LED SFP+

Feature

Detailed Description

SFP+ 10G management port LED

l   Off – No Link

l   On/Flashing Green –SFP+ port has a valid link at 10G. Flashing indicates activity.

l   On/Flashing Amber –SFP+ port has a valid link at 1G. Flashing indicates activity.

RJ45 10/100/1G Management port LED

l   Off – No Link

l   On/Flashing Green –Has a valid link. Flashing indicates activity.

 

Copyright © 2024 Pica8 Inc. All Rights Reserved.