S5860-24XMG Switch Port Name Description

NOTE:

Ports te-1/1/29, te-1/1/30, te-1/1/31 and te-1/1/32 are a group of ports, you should manually configure the port speed for these four ports by using the set interface gigabit-ethernet speed command before inserting an optical module. When configuring the rate, the supported port rates are 25 Gbit/s, 10 Gbit/s, and 1 Gbit/s. The four ports can be configured with the same port rate or different rate. When configured at different port rates, 10G and 1G can coexist, but 25G cannot coexist with 10G or 1G. The following table gives several cases of speed setting for this group of ports.

	te-1/1/29	te-1/1/30	te-1/1/31	te-1/1/32	Allowed or not allowed
case #1	10 G	10G	10G	10G	✓
case #2	1G	1G	1G	1G	✓
case #3	25G	25G	25G	25G	✓
case #4	1G	10G	1G	10G	✓
case #5	25G	1G	25G	25G	×
case #6	25G	10G	25G	10G	×
case #7	25G	1G	10G	25G	×

Mapping between physical ports, interface names and interface support speed are in the following table.

Physical Port Number	Interface Names	Interface Support Speed
1	te-1/1/1	100M/1G/2.5G/5G/10G
2	te-1/1/2	100M/1G/2.5G/5G/10G
3	te-1/1/3	100M/1G/2.5G/5G/10G
4	te-1/1/4	100M/1G/2.5G/5G/10G
5	te-1/1/5	100M/1G/2.5G/5G/10G
6	te-1/1/6	100M/1G/2.5G/5G/10G
7	te-1/1/7	100M/1G/2.5G/5G/10G
8	te-1/1/8	100M/1G/2.5G/5G/10G
9	te-1/1/9	100M/1G/2.5G/5G/10G
10	te-1/1/10	100M/1G/2.5G/5G/10G
11	te-1/1/11	100M/1G/2.5G/5G/10G
12	te-1/1/12	100M/1G/2.5G/5G/10G
13	te-1/1/13	100M/1G/2.5G/5G/10G
14	te-1/1/14	100M/1G/2.5G/5G/10G
15	te-1/1/15	100M/1G/2.5G/5G/10G
16	te-1/1/16	100M/1G/2.5G/5G/10G
17	te-1/1/17	100M/1G/2.5G/5G/10G
18	te-1/1/18	100M/1G/2.5G/5G/10G
19	te-1/1/19	100M/1G/2.5G/5G/10G
20	te-1/1/20	100M/1G/2.5G/5G/10G
21	te-1/1/21	100M/1G/2.5G/5G/10G
22	te-1/1/22	100M/1G/2.5G/5G/10G
23	te-1/1/23	100M/1G/2.5G/5G/10G
24	te-1/1/24	100M/1G/2.5G/5G/10G
25	te-1/1/25	1G/10G
26	te-1/1/26	1G/10G
27	te-1/1/27	1G/10G
28	te-1/1/28	1G/10G
29	te-1/1/29	1G/10G/25G
30	te-1/1/30	1G/10G/25G
31	te-1/1/31	1G/10G/25G
32	te-1/1/32	1G/10G/25G