IPv4/IPv6 BGP Configuration
This section describes how to use Border Gateway Protocol (BGP) protocol.
NOTE:
- Enable IP routing function before using this feature, for details please refer to Configuring IP Routing.
- BGP protocol supports VRF.
- BGP Introduction
- BGP Regular Expressions
- Basic BGP Configuration
- Configuring BGP Security
- Configuring a BGP Route Reflector
- Configuring BGP Timers
- Configuring BGP Route Aggregation
- Configuring BGP Dynamic Neighbors
- Configuring eBGP Multihop
- Configuring Removing and Replacing Private ASNs from the AS Path
- Configuring BGP Multipath
- Configuring ebgp-requires-policy
- Enable BGP Read-only Mode
- Configuring Route Maps for Route Updates
- BGP Unnumbered
- Configuring BGP Attribute
- Configuration Examples
Copyright © 2024 Pica8 Inc. All Rights Reserved.