set routing route-map on-match

The set routing route-map on-match command specifies an alternative Exit Policy to take if the entry matched, rather than the normal policy of exiting the route-map and permitting the route.
The delete routing route-map on-match command removes the route map entry configuration.

Command Syntax

set routing route-map <route-map-name> order <NUMBER> on-match {goto <NUMBER2>| next}

delete routing route-map <route-map-name> order <NUMBER> on-match {goto <NUMBER2>| next}

Parameter

Parameter	Description
route-map <route-map-name>	Specifies the name of the route map. Required.
order <NUMBER>	Specifies the sequence number of the entry. Required. The value is an integer that ranges from 1 to 65535.
{goto <NUMBER2>\| next}	The two possibilities are: • next: Continue on with processing of the route-map entries. • goto <NUMBER2>: Jump ahead to the first route-map entry whose order in the route-map is >=NUMBER2. Jumping to a previous entry is not permitted. The value is an integer that ranges from 1 to 65535.

Example

Configure a on-match clause in the route map:

admin@Xorplus# set routing route-map GlobalMap order 10 on-match next
admin@Xorplus# commit