ovs-vsctl set bridge
- Tracy Yang
Owned by Tracy Yang
May 24, 2024
1 min read
Loading data...
Examples
The following examples provide typical usage of the ovs-vsctl set bridge command.
Disabling In-Band Management
By default, remote in-band management is enabled on Open vSwitch. You can disable in-band management by setting the other-config parameter disable-in-band to true. And the configurations will apply in all the controllers in the bridge.
The following example disables in-band management of bridge br0:
admin@Switch$ovs-vsctl set bridge br0 other-config:disable-in-band=true
The following example enables in-band management of bridge br0:
admin@Switch$ovs-vsctl set bridge br0 other-config:disable-in-band=false
Copyright © 2024 Pica8 Inc. All Rights Reserved.