set interface bpdu-tunneling destination-mac

The set interface bpdu-tunneling destination-mac command configures the BPDU tunneling destination multicast MAC address to replace the original destination multicast MAC address.

Command Syntax

set interface bpdu-tunneling destination-mac <destination-mac>

Parameter

Parameter

Description

destination-mac <destination-mac>

Specifies the destination multicast MAC address that replaces the destination multicast MAC address of Layer 2 protocol packets.

The value is in H:H:H:H:H:H format. An H contains 2 hexadecimal numbers. The value ranges from 01:00:00:00:00:00 to 01:ff:ff:ff:ff:ff.

The following multicast MAC addresses can not be used:

01:80:C2:00:00:00 to 01:80:C2:00:00:2f.

Example
• Configures the BPDU tunneling destination multicast MAC address to replace the original destination multicast MAC address.

admin@XorPlus# set interface bpdu-tunneling destination-mac 01:90:00:00:00:1a
admin@XorPlus# commit