S3410-24TS-P

Front Panel Schematic

(1) Status LED	(2) PWR1 LED	(3) PWR2 LED
(4) M1/M2 LED	(5) PoE LED	(6) PoE Button
(7) Console port	(8) USB port	(9) 10/100/1000BASE-T RJ45 port
(10) SFP port	(11) SFP+ 10G port	-

Rear Panel Schematic

(1) PS1 (Power Supply)

(2) PS2

-

Switch System Characteristics

Mechanical dimension (HxWxD)	44mmx440mmx320mm
RJ45 Console port	1
10/100/1000BASE-T RJ45 port	24
10/100/1000BASE-T RJ45 port LED	24
100/1000M SFP port (Combo Port)	2
100/1000M SFP port (Combo Port) LED	2
SFP+ 10G port	2
SFP+ 10G LED	2
Status LED	1
PWR1 LED	1
PWR2 LED	1
M1/M2 LED	2
PoE LED	1
*PoE button	1
Power Supply	1+1
FAN	2 x Built-in Fans
Working environment temperature	32°F to 122°F (0ºC to 50ºC)

*PoE button

The 24x1G RJ45 ports on the front panel support PoE, the maximum output power supported is up to 30 watts.

PoE button on the front panel controls whether the port LED indicates data switching status or PoE power supply status of the first 24 ports.

By default, port LED indicates data switching status of the port. PoE LED on the front panel of system LED block is solid green.
If pressed the PoE button, the port LED indicates PoE power supply status of the port. PoE LED on the front panel of system LED block changes to solid amber.

*Combo Port

Ports ge-1/1/23 and ge-1/1/24 are combo ports that support 1G port speed. A combo port consists of a GE electrical interface and a GE optical interface separately on the front panel. The multiplexed electrical and optical interfaces share one internal forwarding interface and cannot work at the same time. When one interface works, the other interface is disabled.

The electrical port has a higher priority, that is, as long as the electrical port is plugged in, the electrical port takes effect, but the optical port is invalid.

When configuring port speed, the combo ports (when worked as electrical ports) only support auto-negotiation mode, that is, configuring the force rate will not take effect for combo port when it works as an electrical port.