set protocols ospf interface authentication-key

Run the command set protocols ospf interface authentication-key to set the authentication password that is used for simple-text authentication on the OSPF interface.
The command delete protocols ospf interface authentication-key deletes the OSPF interface authentication password that is used for simple-text authentication.

NOTE:

The command set protocols ospf interface <interface-name> authentication address <ipv4> is a mandatory configuration for setting the authentication address used for OSPF authentication.

Command Syntax

set protocols ospf interface <interface-name> address <ipv4> authentication-key <PASSWORD>

delete protocols ospf interface <interface-name> address <ipv4> authentication-key

Parameter

Parameter	Description
interface <interface-name>	Specifies the VLAN interface name, the loopback interface name, the routed interface or the sub-interface name.
address <ipv4>	Specifies an IPv4 address.
authentication-key <PASSWORD>	Specifies the password for simple-text authentication. The value is a string of 6 to 8 characters.

Example

Configure OSPF authentication password on the interface address.

admin@XorPlus# set protocols ospf interface vlan200 address 10.10.114.1 authentication-key asjlfk
admin@Xorplus# commit

PICOS-4.5_Configuration_Guide

set protocols ospf interface authentication-key

Related content