/
Staging Switches

Staging Switches

Owned by Jennifer Xiao
Last updated: May 21, 2025 by 黄小玲

After you add a switch configuration, you must stage the switch to make it ready for Zero Touch Provisioning (ZTP).

Procedure

  1. In the AmpCon-DC UI, click Service > Switch.

  2. In the Switch list, locate the switch, and then click Stage.

image-20250521-075314.png

  1. Check whether the switch status is shown as Staged.

image-20250521-075335.png

After you stage the switch, you can continue to provision new switches with ZTP.

 

Copyright © 2025 Pica8 Inc. All Rights Reserved.