Installing on VMware ESXi

You can install the AmpCon-Campus server on VMware ESXi 6.7, 7.0, 8.0. For how to use VMware ESXi in general, see the VMware ESXi documentation.

Prerequisites

• Ensure that the installation requirements are met.

• Download the compressed AmpCon-Campus server image file by going to the FS AmpCon-Campus website and then clicking AmpCon-Campus for VMWare ESXi 2.1.x Software in the Resources section.

• Put the compressed AmpCon-Campus server image file to the machine where the hypervisor exists, and unzip the file.

Installation Procedure

1. Open the VMware ESXi console, and then click Create / Register VM.

Open

2. Select Deploy a virtual machine from an OVF or OVA file, and then click Next.

Open

3. Enter the virtual machine name, upload the AmpCon-Campus server .ovf and .vmdk files, and then click Next.

4. Confirm the storage type and datastore, and then click Next.

5. In the Network mappings drop-down list, select Wuhan Network, and then click Next.

6. Click Finish.

Wait for the importing process to finish. Once completed, the virtual machine is successfully imported, and the AmpCon-Campus server is installed.

7. On the VMware ESXi console, click the new virtual machine name that you specified in step 3.

8. Click Console to open the virtual machine console.

9. Modify the network interface configuration.

10. Start the AmpCon-Campus server by running the following command:

Now the AmpCon-Campus server is installed and started.

What to Do Next

After you install the AmpCon-Campus server, you need to import the AmpCon-Campus License and add system configurations.