The following L2/L3 features are not supported on S3410 Series switch:
not support L3 GRE
not support VXLAN
not support IGMP
not support PIM
not support buffer dynamic shared for egress multicast queue
not support symmetric hash
not support resilient hash
not support advance hash
not support PFC (Priority Flow Control)
not support ECMP
not support NETCONF
not support VRF
not support CoPP max bandwidth and min bandwidth configuration
S3410 Series switches do not support OVS (Open vSwitch).
S3410 Series switches do not support CrossFlow.
The command sudo systemctl stop picos and sudo systemctl restart picos can only be execued through a serial console port connection for S3410 Series switches.
S3410 Series switches do not have an Eth0 management port; instead, an in-band management port is used. By default, the in-band management function of all the service port is enabled on VLAN 1 with a system built-in interface name inband-mgmt. For more details, see document Default Settings for In-Band Management Interface on S3410 Series Switches .
Skip to end of banner
Go to start of banner
FS S3410 Series Switch Unsupported Features and Limitations
General
Content
Integrations