set ipv6-source-guard traceoptions enable

Owned by Tracy Yang
Last updated: May 31, 2024
1 min read

The set ipv6-source-guard traceoptions enable command can be used to enable or disable debugging for tracing IPv6 source guard operations.

The delete ipv6-source-guard traceoptions enable command deletes the configuration.

 

Command Syntax

set ipv6-source-guard traceoptions enable <true | false>

delete ipv6-source-guard traceoptions enable

 

Parameter

Parameter

Description

disable <true | false>

Enable or disable debugging for tracing IPv6 source guard operations. The value could be true or false.

  • true: Disable debugging for tracing IPv6 source guard operations.

  • false: Enable debugging for tracing IPv6 source guard operations.

By default, debugging for tracing IPv6 source guard operations is disabled.

 

Example

  • Enable debugging for tracing IPv6 source guard operations.

admin@PICOS# set ipv6-source-guard traceoptions enable true admin@PICOS# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.