PICOS Documentation
Spaces
Apps
Templates
Create
PICOS-4.4.5_Configuration_Guide
All content
Space settings
Content
Results will update as you type.
•
Release Notes for PICOS 4.4.5
Hardware Guides
PICOS System Configuration Guide
PICOS Routing and Switching Configuration Guide
PICOS Routing and Switching Command Reference
Command-Line Interface Commands
System Management Commands
Interface Configuration Commands
VLAN Configuration Commands
Voice VLAN Configuration Commands
Layer 3 Routing Commands
ACL Configuration Commands
QoS Configuration Commands
Protocol Configuration Commands
IP Multicast Commands
•
OpenFlow Commands in CrossFlow Mode
VXLAN Commands
BGP EVPN Commands
PoE Configuration Commands
VRRP Commands
Spanning Tree Protocol Commands
MLAG Commands
GRE Tunnel Interface Commands
GVRP Commands
MVRP Commands
ERPS Commands
EFM OAM Commands
Loopback Detection Commands
•
set protocols loopback-detection enable
•
set protocols loopback-detection interface enable
•
set protocols loopback-detection message-interval
•
set protocols loopback-detection traceoptions configuration disable
•
set protocols loopback-detection traceoptions all disable
•
run show loopback-detection
•
run clear loopback-detection interface
PICOS Open vSwitch Configuration Guide
PICOS Open vSwitch Command Reference
Troubleshooting Guide
Blogs
PICOS-4.4.5_Configuration_Guide
/
/
PICOS Routing and Switching Command Reference
/
Loopback Detection Commands
Summarize
Loopback Detection Commands
Tracy Yang
Owned by
Tracy Yang
Jul 18, 2024
1 min read
Loading data...
Copyright © 2024 Pica8 Inc. All Rights Reserved.
{"serverDuration": 11, "requestCorrelationId": "7d07d224e9484d04872b9be9b857f859"}