The show mlag configuration command displays the configuration information of MLAG.

Command Syntax

show mlag configuration [domain-id]

Parameter

Parameter	Description
domain-id	Optional. Specifies the MLAG domain ID.

Example

Show the configuration information of MLAG.

admin@Xorplus# run show mlag configuration
Domain-id  Local-LAG  System-id      Priority  Source    Peer       Peer-link  Hello-interval  Reload-delay 
---------  ---------  -----------------  ----  ---------- -------------   ---------  ---------        ----------
 1     ae1      e0:07:1b:cb:20:51  0    N/A     192.168.46.1   ae4       4         0

Browser not supported