protocols ospf6 area interface vif retransmit-interval

To specify the time between LSA (link-state advertisement) retransmissions for adjacencies belonging to the interface, use the set protocols ospf6 area interface vif retransmit-interval command in L2/L3 configuration mode.

Command Syntax

set protocols ospf6 area area-id interface interface-name vif vif-name retransmit-interval time

Parameters

area-id	OSPFv6 area identifier.
interface-name	Interface name.
vif-name	Virtual interface name.
time	The retransmit interval in seconds. The rangeis 1-65535.

Example

The following example sets the retransmit interval to 20 seconds:

admin@Switch# set protocols ospf6 area 0.0.0.0 interface vlan2 vif vlan2 retransmit-interval 20