/
interface aggregate-ethernet <lag_name> aggregated-ether-options mlag peer <ipv4> peer-link

interface aggregate-ethernet <lag_name> aggregated-ether-options mlag peer <ipv4> peer-link

Owned by Tracy Yang (Unlicensed)
Dec 16, 2018

Use this command to specify IP address of MLAG neighbor switch. The synchronized messages are sent to neighbor switch by peer link.

 set interface aggregate-ethernet <lag_name> aggregated-ether-options mlag peer <ipv4_address> peer-link <text>

To delete the configuration enter:
delete interface aggregate-ethernet <lag_name> aggregated-ether-options mlag peer <ipv4_address> peer-link

• <lag_name> Name of a configured LAG interface.
• <ipv4_address> The ip address of peer aggregated port.
• <text> The interface that connect to the peer.

This example is to configure IP address of peer  ae2:

admin@XorPlus# set interface aggregate-ethernet ae1 aggregated-ether-options mlag peer 10.0.0.1 peer-link "ae2"
admin@XorPlus# commit

Copyright © 2025 Pica8 Inc. All Rights Reserved.