interface gigabit-ethernet <port> ether-options 802.3ad

Users can add a specified port to a LAG.

Command Syntax
set interface gigabit-ethernet <port> ether-options 802.3ad <lag>
delete interface gigabit-ethernet <port> ether-options 802.3ad

Parameter
• <port> ethernet switching port identifier,the valid ports range 1-52
• <lag> Join an aggregated Ethernet interface LAG.

NOTE:

The maximum number of member ports supported in the LAG interface is model dependent, see the table below.

Model	Max Member Ports per LAG
ARCTICA4806XP	64
AS4610_30p	8
AS4610_54p	8
AS5712_54p	64
AS5812_54t	64
AS5812_54x	64
AS6701_32x	64
AS6712_32x	64
AS7712_32x	64
AS7312_54x	64
AS6812_32x	64
AG6248C	8
AG5648	64
AG7648	64
AG9032	64
DCS7032Q28	64
MSH8911	64
MSH8920	64
PRONTO3290	8
PRONTO3295	8
PRONTO3296	8
PRONTO3780	64
PRONTO3920	64
PRONTO3922	64
PRONTO3924	64
PRONTO3930	64
PRONTO5101	64
PRONTO5401	64
S4048	64
Z9100	64

Example
• This example is to add ge-1/1/3 to ae1:

admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 ether-options 802.3ad ae1
admin@XorPlus#commit