run show dot1x interface statistics gigabit-ethernet

The run show dot1x interface statistics gigabit-ethernet command displays the 802.1X statistics information on an interface.

Command Syntax

run show dot1x interface statistics gigabit-ethernet <interface-name>

Parameter

Parameter	Description
gigabit-ethernet <interface-name>	Specifies the physical interface name. The value is a string.

Example

Run run show dot1x interface statistics gigabit-ethernet command to display the 802.1X statistics information on interface ge-1/1/13.

admin@Xorplus# run show dot1x interface statistics gigabit-ethernet ge-1/1/33
Dot1x packet statistics for ge-1/1/33
------------------------------
Sent : 
EAPOL Start Packets  : 0 
EAPOL LogOff Packets : 0 
EAPOL EAP Packets    : 136 
EAP Request Packets  : 110 
EAP Response Packets : 0
EAP Success Packets  : 1 
EAP Failure Packets  : 25

Received :
EAPOL Start Packets  : 0 
EAPOL LogOff Packets : 0
EAPOL EAP Packets    : 0
EAP Request Packets  : 0
EAP Response Packets : 0 
EAP Success Packets  : 0
EAP Failure Packets  : 0