/
set protocols ospf6 area

set protocols ospf6 area

Owned by Tracy Yang (Unlicensed)
Oct 14, 2021

Use the command set protocols ospf6 area to configure area for the OSPFv3 instance. 

Run the command delete protocols ospf6 area to delete this configuration from the switch.


Command Syntax

set protocols ospf6 area{<ipv4> | <area-id>}

delete protocols ospf6 area{<ipv4> | <area-id>}


Parameters

ParameterDescription
area{<ipv4> | <area-id>Specifies the area for OSPFv3, the value could be in IPv4 dotted decimal format or an integer ranging from 0 to 4294967295.

Example

  • This example configures the OSPFv3 area ID to 0.0.0.0.
admin@XorPlus# set protocols ospf6 area 0.0.0.0

Copyright © 2025 Pica8 Inc. All Rights Reserved.