set protocols ospf6 interface passive

Run the command set protocols ospf6 interface passive to identify a specific interface as OSPFv3 passive interface. Passive interfaces are part of OSPFv3 database but they do not send or receive OSPF LSAs. OSPFv3 does not try to form adjacency relationship with peers on these interfaces.

Run the command delete protocols ospf6 interface passive to remove this configuration.

Command Syntax

set protocols ospf6 interface <vlan-interface> passive

delete protocols ospf6 interface <vlan-interface> passive

Parameter

Example

•  Set the interface vlan200 as OSPFv3 passive interface.

admin@XorPlus# set protocols ospf6 interface vlan200 passive
admin@Xorplus# commit