set system inband vlan-interface

The set system inband vlan-interface command sets a specified L3 VLAN interface in the default VRF as the inband management port.

Command Syntax

set system inband vlan-interface <vlan-interface>

Parameter

Parameter	Description
vlan-interface <vlan-interface>	Specifies an L3 VLAN interface in the default VRF as the inband management port. The value is a string.

Usage Guidelines

By default, the user cannot remotely log in and manage the switch through the L3 VLAN interface.

Use set system inband vlan-interface <vlan-interface> command to set a specified L3 VLAN interface in the default VRF as the inband management port. The L3 VLAN interface with the inband management function enabled can transmit both management traffic and data plane traffic.

NOTE:

Only the L3 VLAN interface in the default VRF can be set as the inband management port. If a VLAN interface has been set as an inband management port, it cannot be bound to other user-defined VRFs.
A maximum of four L3 VLAN interfaces in the default VRF can be set as the inband management ports by using set system inband vlan-interface <vlan-interface> command.

Example

Enable the inband management function of the L3 VLAN interface vlan100.

admin@Xorplus# set system inband vlan-interface vlan100
admin@Xorplus# commit