set system inband vlan-interface

Owned by Tracy Yang
Nov 28, 2023
1 min read

The set system inband vlan-interface command sets a specified L3 VLAN interface in the default VRF as the inband management port.


Command Syntax

set system inband vlan-interface <vlan-interface>


Parameter

Parameter

Description

vlan-interface <vlan-interface>

Enables inband management on a specfied L3 VLAN interface in the default VRF. The value is a string.


Usage Guidelines

By default, the user cannot remotely log in and manage the switch through the L3 VLAN interface.

Use this command to set a specified L3 VLAN interface in the default VRF as the inband management port. The L3 VLAN interface with the inband management function enabled can transmit both management traffic and data plane traffic.

NOTE:

 Only the L3 VLAN interface in the default VRF can be set as the inband management port. If a VLAN interface has been set as an inband management port, it cannot be bound to other user-defined VRFs.


Example

  •   Enable the inband management function of the L3 VLAN interface vlan100.
admin@Xorplus# set system inband vlan-interface vlan100
admin@Xorplus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.