show interface gigabit-ethernet <interface>

This command is to show brief,detail or dot1q-tunneling information of a specified port.

Command Syntax
run show interface gigabit-ethernet <interface> [text]

Parameter
•<interfce> a specified interface identifier,[ge-1/1/1...ge-1/1/48],[te-1/1/49...te-1/1/52]
•[text] The special information.

brief Show interface brief information
detail Show interface detail information
dot1q-tunneling Show dot1q tunneling information about the specified interface

Example
• This example is to show detail information on ge-1/1/3:

admin@XorPlus# run show interface gigabit-ethernet ge-1/1/3 detail 
Physical interface: ge-1/1/3, Enabled, error-discard False, Physical link is Up
Interface index: 3, SFP type: Unknown
Description: 
Link-level type: Ethernet, MTU: 1514, Speed: 100Mb/s, Duplex: Full
Source filtering: Disabled, Flow control: Disabled, Auto-negotiation: Enabled
Interface flags: Hardware-Down SNMP-Traps Internal: 0x0
Interface rate limit ingress:0, egress:0
Current address: 08:9e:01:a8:00:49, Hardware address: 08:9e:01:a8:00:49
Traffic statistics:
5 sec input rate 0 bits/sec, 0 packets/sec
5 sec output rate 392 bits/sec, 0 packets/sec
Input Packets............................10000
Output Packets...........................186601
Input Octets.............................640000
Output Octets............................15763131
Transmit:
Unicast packets........................91800
Multicast packets......................64781
Broadcast packets......................30020
Packets 64 Octets......................121822
Packets 65-127 Octets..................64777
Packets 128-255 Octets.................2
Packets 256-511 Octets.................0
Packets 512-1023 Octets................0
Packets 1024-1518 Octets...............0
Oversize Packets.......................0
Total Packets Without Errors...........186601
Discarded Packets......................0
Total Packets With Errors..............0
Single Collision Frames................0
Multiple Collision Frames..............0
Deferred Frames........................0
Late Collisions........................0
Excessive Collisions...................0
Pause Frames...........................0
Receive:
Unicast packets........................10000
Multicast packets......................0
Broadcast packets......................0
Packets 64 Octets......................10000
Packets 65-127 Octets..................0
Packets 128-255 Octets.................0
Packets 256-511 Octets.................0
Packets 512-1023 Octets................0
Packets 1024-1518 Octets...............0
Oversize Packets.......................0
Total Packets Without Errors...........10000
Discarded Packets......................0
Total Packets With Errors..............0
Alignment Errors.......................0
FCS Errors.............................0
Collisions.............................0
Pause Frames...........................0