IPv6 Neighbor Discovery Protocol Command Reference
- Tracy Yang (Unlicensed)
This section describes the PICOS IPv6 Neighbor Discovery configuration commands.
Please note that N3048EP-ON and N3048ET-ON switches do not support IPv6.
Also, the N22XX series switches do not support IPv6.
set l3-interface vlan-interface ipv6-nd adv-interval-option
set l3-interface vlan-interface ipv6-nd home-agent-config-flag
set l3-interface vlan-interface ipv6-nd home-agent-lifetime
set l3-interface vlan-interface ipv6-nd home-agent-preference
set l3-interface vlan-interface ipv6-nd managed-config-flag
set l3-interface vlan-interface ipv6-nd mtu
set l3-interface vlan-interface ipv6-nd other-config-flag
set l3-interface vlan-interface ipv6-nd prefix off-link
set l3-interface vlan-interface ipv6-nd prefix preferred-lifetime
set l3-interface vlan-interface ipv6-nd prefix router-address
set l3-interface vlan-interface ipv6-nd prefix valid-lifetime
set l3-interface vlan-interface ipv6-nd ra-fast-retrans
set l3-interface vlan-interface ipv6-nd ra-interval
set l3-interface vlan-interface ipv6-nd ra-lifetime
Copyright © 2025 Pica8 Inc. All Rights Reserved.