/
system remote-config allow-client

system remote-config allow-client

Owned by Tracy Yang (Unlicensed)
May 27, 2022

User can remotely configure client IPV4 address and netmask or delete it.

Command Syntax
set system remote-config allow-client <IPV4Net>
delete system remote-config allow-client <IPV4Net>

Parameter
• <IPV4Net> It stands ipv4 address and netwask.

Example
• This example demonstrates how to remotely configure client IPV4 address and netmask as 192.168.1.0/24:

admin@XorPlus# set system remote-config allow-client 192.168.1.0/24
admin@XorPlus# commit

Copyright © 2025 Pica8 Inc. All Rights Reserved.