system login-acl network

Owned by Tracy Yang (Unlicensed)
Apr 26, 2023
1 min read

User can configure the ACL to control whether remote hosts within specified subnetworks are allowed to log in the system. User can set ipv4-address/netmask or ipv6-address/netmask to configure remote hosts from both subnetworks log in. User can also delete them.

 

Command Syntax
set system login-acl network <IPV4Net>
set system login-acl network <IPV6Net>
delete system login-acl network <IPV4Net>
delete system login-acl network <IPV6Net>

 

Parameter
• <IPV4Net> It stands ipv4 address and netmask.
• <IPV6Net> It stands ipv6 address and netmask.

 

Example
• This example demonstrates how to configure the login ACL attributes is ipv4-address and netmask:

admin@XorPlus# set system login-acl network 192.168.1.0/24
admin@XorPlus# commit

• This example demonstrates how to configure the login ACL attributes is ipv6-address and netmask:

admin@XorPlus# set system login-acl network 2001:1:1:1::/64
admin@XorPlus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.