The set protocols bfd profile echo-mode command can be used to enable BFD echo mode for a profile. This mode is disabled by default.

The delete protocols bfd profile echo-mode command sets the configuration to the default value.

Command Syntax

set protocols bfd profile <profile-name> echo-mode

Parameter

Parameter	Description
profile <profile-name>	Specifies the profile name. The value is a string.

Usage Guidelines

It is recommended that the transmission interval of control packets to be increased after enabling echo-mode to reduce bandwidth usage. For example: transmit-interval of 2000ms.
Echo mode is not supported on multi-hop BFD sessions.

Example

Enable BFD echo mode.

admin@Xorplus# set protocols bfd profile p2 echo-mode
admin@Xorplus# commit

Browser not supported